Toronto services
Windows, Doors & Exterior Upgrades in Toronto
Windows, doors and exterior finishes need to manage rain, air movement and seasonal expansion together. Toronto freeze-thaw cycles, summer sun and wind-driven rain can expose weaknesses at frames, joints and transitions long before a whole surface needs replacement.
Statley Roofing & Masonry assesses the affected opening or exterior assembly before recommending work. We discuss materials, colour and practical repair limits in a written quote, establish the scope through a written contract, and finish with clean-up and a walkthrough.
Window Installation & Replacement
Window replacement should address the opening and its water-management details, not only the glass and frame. We assess existing trim, sill condition, signs of leakage and the suitability of an insert or full-frame approach. Toronto wind-driven rain and winter condensation can produce similar symptoms but require different responses. Installation includes appropriate support, insulation and sealing, while preserving intended drainage routes. Rot around the opening may require additional repairs before the new unit is fitted. We discuss operating style, frame materials and exterior colour alongside practical considerations such as access, ventilation and the condition of surrounding masonry or siding.
Door Installation & Replacement
Exterior doors need a sound opening, stable threshold and weather seals that work with the surrounding wall. We inspect sticking, drafts, damaged frames and water staining before discussing replacement materials and configurations. Toronto snowmelt can expose poor sill details at entrances, particularly where landings slope toward the door. Installation includes checking alignment, anchorage, insulation and connections to adjacent finishes. We also consider swing clearance, hardware and everyday access. A new slab alone may not correct a deteriorated frame or moving opening, so the proposed scope identifies whether the frame, threshold and surrounding trim are included.
Skylight Installation & Replacement
Skylights connect a roof opening to the interior through a frame, flashing system and often a light shaft. We assess roof slope, covering condition and the existing opening before discussing a compatible unit. Toronto snow accumulation and ice dams make roof integration important around the upper and lower flashing details. Replacement may involve removing nearby roofing and repairing the curb or surrounding substrate. New openings can require structural design and applicable approvals, depending on the work. We also discuss interior finishing and condensation conditions so the project accounts for both the roof assembly and the room below.
Skylight Leak Repairs
Water around a skylight can come from failed flashing, deteriorated seals, nearby roofing defects or indoor condensation. We inspect the accessible unit and surrounding roof, and ask when the moisture appears to help distinguish these possibilities. Toronto winter conditions can produce condensation at cold glazing or backup from ice near the opening. Repairs may involve restoring compatible flashing, replacing deteriorated components or recommending unit replacement where appropriate. Surface caulking alone may not correct a poorly layered roof connection. We explain what the inspection establishes and whether concealed curb damage or interior shaft conditions need further investigation.
Exterior Caulking & Sealing
Exterior sealant joints accommodate movement and limit water entry at selected transitions around windows, doors and other materials. We assess failed adhesion, splitting and the condition of adjacent surfaces before choosing a compatible product. Toronto temperature swings can quickly expose joints that are too shallow, poorly prepared or unable to move. Work generally involves removing failed sealant, preparing bond surfaces and using backing where needed. Not every gap should be sealed: window weeps and designed drainage openings must remain functional. We distinguish a sealant repair from defects in flashing or wall drainage that need a different solution.
Exterior Painting
Exterior painting begins with substrate assessment and preparation, not simply a colour change. We inspect wood, metal or previously coated masonry for peeling, moisture damage and incompatible earlier finishes. Toronto weather requires suitable temperature and drying conditions during preparation and coating application. Work may include cleaning, controlled removal of loose paint, localized repairs and appropriate priming before finish coats. Persistent dampness or decayed trim should be addressed first. We discuss colour, sheen and adjacent materials, while explaining that paint cannot correct leaking joints, unstable surfaces or masonry problems that require repair rather than another coating.
Stucco Installation & Repairs
Stucco repairs need to suit the existing wall system, since traditional cement plaster and insulated finish assemblies use different materials and details. We inspect cracking, staining, impact damage and transitions around openings before defining the scope. Toronto freeze-thaw exposure can worsen areas that remain wet behind the finish. Work may involve localized removal, substrate repairs and reinstatement with compatible reinforcement and finish layers. Texture and colour matching are discussed because repaired areas may remain visible. Repeated cracking or soft areas can indicate concealed problems, so a surface patch should not replace investigation of drainage or backing deterioration.
Parging & Foundation Coatings
Parging provides a protective and decorative cement-based finish on suitable exposed foundation surfaces. We assess loose material, cracks and moisture conditions before preparing the wall and applying a compatible system. Toronto splashback and freeze-thaw exposure can cause poorly bonded layers to separate, particularly near grade. Work involves removing unsound areas rather than spreading new material over a failing surface. Parging is not a substitute for foundation waterproofing or structural repair. We explain its role and review nearby grading or drainage issues that could continue wetting the foundation after the visible surface has been renewed.
Exterior Carpentry
Exterior carpentry includes repairs to suitable trim, porch components and other exposed wood features. We assess decay, loose connections and water traps before selecting replacement materials and detailing the work. Toronto rain and snow can repeatedly wet end grain, horizontal ledges and joints close to masonry. Repairs may involve removing deteriorated sections, restoring sound attachments and preparing surfaces for an appropriate finish. We consider how water will shed from the new detail rather than simply reproducing a failed shape. Structural components require separate assessment where damage affects support, especially around elevated porches or connections carrying significant loads.
Deck Construction & Repairs
Deck work begins with the supporting structure, connections and intended use rather than the surface boards alone. We assess footings, posts, beams, joists and attachment to the building before recommending repairs or new construction. Toronto freeze-thaw movement and trapped moisture can damage supports and concealed connections. Planning includes drainage, suitable fasteners, guard and stair details, and material choices appropriate to the layout. Structural design may be needed for particular heights, loads or configurations. Some of this work may require a building permit from the City of Toronto; we'll confirm what's needed for your project.
Exterior Repairs & Restoration
Exterior restoration often involves several connected defects rather than one isolated material. We assess cladding, trim, joints and water-shedding details to identify where deterioration begins and how it affects adjacent areas. Toronto weather can expose a small flashing defect as damaged paint, soft wood or stained masonry further below. The scope may combine localized carpentry, sealing and compatible surface repairs, with other trades involved where appropriate. We prioritize sound backing and practical drainage before decorative finishes. If concealed damage appears after removal, we explain the findings before defining any additional work needed to complete the repair properly.
Related services
Windows, Doors & Exterior Upgrades FAQ
Does window replacement include the surrounding frame?
It depends on the agreed approach. Insert replacement and full-frame replacement have different scopes, and deteriorated surrounding materials may require additional repair.
Why is my skylight wet in winter?
Possible causes include condensation, flashing defects or water backup near the opening. The timing and surrounding roof conditions help distinguish the source.
Should every exterior gap be caulked?
No. Designed drainage and ventilation openings must remain functional. Sealant should be used only where it suits the assembly and intended movement.
Does parging waterproof a basement?
No. Parging is a surface finish on suitable foundation areas. Basement water entry may require drainage, crack repair or a separate waterproofing approach.
Can deck boards be replaced without checking the framing?
The framing and connections should be assessed first. New boards can conceal deterioration in joists, supports or building attachments.
Can exterior finishes be matched exactly?
An exact match is not always possible because existing materials weather and products change. We discuss colour, texture and likely repair visibility before work.
Free estimates
Free estimate for windows, doors & exterior upgrades
Tell us what's going on and add a few photos if you can. We'll arrange an inspection and give you a written quote.
Ready for a free written estimate?
Tell us about your roof, masonry or exterior project. We'll arrange an inspection and put our recommendations in writing.